TrojanUV3000B installation at a wastewater treatment plant in Ontario, Canada

TrojanUV3000B

An operator-friendly, economical UV treatment system for small wastewater plants

Simple and Reliable Wastewater Treatment

The TrojanUV3000®B is a simple, yet robust system designed for small wastewater treatment plants that are looking to treat 1 – 5 MGD (158 – 789 m3/hr). The system is straightforward to use and requires minimal operator involvement thanks to its modular design and proven components.


    TrojanUV3000B Logo

    Key Features and Benefits

    A TrojanUV3000B installation at a wastewater treatment plant in Ontario, Canada

    Streamlined Installation

    The TrojanUV3000B can be easily retrofitted into existing chlorine contact tanks and effluent channels, and comes pre-tested, pre-assembled and pre-wired to minimize installation costs. All components can be installed outdoors, eliminating the need for and costs of additional buildings.

    Advanced, Self-Contained UV Modules

    Space-saving electronic lamp drivers are housed right in the modules – not in separate external cabinets – and are cooled by convection. All module wiring is pre-installed, factory-tested, and enclosed inside a waterproof frame.

    A photo of an operator removing a lamp driver (ballast) from a TrojanUV3000B module

    An operator replacing a UV lamp on a TrojanUV3000B module

    Operator-friendly Design

    Modules are lightweight and electrically separate, allowing a single module to be removed without disrupting flow or taking the system offline. Lamps are guaranteed for 12,000 hours of operation and can be replaced without tools. A UV lamp status indicator provides at-a-glance monitoring and helps determine when replacement is needed.

    Proven Performance

    The TrojanUV3000B has been validated through microbial testing. Through this testing, performance data has been generated for UV dose delivery to inactivate microorganisms Escherichia coli (E. coli ) and fecal coliform.

    A TrojanUV3000B module, power distribution center, and system control center

    A graphical representation of wastewater flowing through a disinfection channel and TrojanUV3000B banks for turning on during periods of high flow and off during periods of low flow

      Flow Pacing

      The System Control Center (SCC) provides digital display of bank status, lamp hours, and UV intensity. Individual banks can be turned on and off automatically in response to variations in flow rate (based on a flow meter signal). This flow pacing maximizes operating efficiency by matching UV output to treatment requirements and reducing electrical consumption during periods of low flow.

      • Is your wastewater treatment plant's flow rate 3 MGD or under? If so, the TrojanUV3000®PTP is another option you should consider. Learn more

        System Specifications

        System Characteristics

        TrojanUV3000B

        Typical Applications

        1 – 5 MGD (158 – 789 m3/hr)

        Lamp Type

        Low-pressure

        Lamp Driver Type

        Electronic; non-variable

        Input Power Per Lamp

        87.5 Watts

        Lamp Configuration

        Horizontal, parallel to flow

        Module Configuration

        4, 6 or 8 lamps per module

        Bank Configuration

        Up to 20 modules per bank

        Channel Configurations

         

        Lamp Banks in Series

        Up to 3

        Channel Options

        Concrete (by others)

        Level Control Device Options

        ALC gate or fixed weir

        Enclosure Ratings

         

        System Monitor/Control Center

        304 stainless steel

        Lamp Driver Enclosure

        Type 6P (IP67)

        Lamp Driver Cooling Method

        Convection; no air conditioning or forced air required

        Installation Location

        Indoor or outdoor

        System Monitoring & Controls

         

        Controller

        Monitoring and bank control

        UV Intensity Monitoring

        Optional

        Flow Pacing

        Optional

        Inputs Required

        4-20 mA flow signal for Flow Pacing

        Local Status Indication

        Lamp Age (hours)
        UV Intensity (mW/cm2)
        Bank Status (on/off)
        Low Intensity Alarm

        Remote Alarms

        UV Intensity (4-20 mA)
        Common Alarm (discrete)

        Location

        Indoor or outdoor

        Maximum Distance from UV Channel

        20 ft. (6 m)

        Electrical Requirements

         

        Power Distribution

        Power Distribution Centre

        Quantity Required

        1 PDC per bank

        Power Input

         120V; single phase 208V,
        3-phase 240V; single phase


        Related Resources

         
        TrojanUV3000B Brochure

        TrojanUV3000B Brochure

        Download
        TrojanUV Service Parts Brochure

        TrojanUV Service & Parts Brochure

        Download

        Spring Checkup

        TrojanUV Spring Startup Checklist

        Download

        Replacement Parts

        [ Error ]

        We're Here to Help

        Have questions? Call us at 1 (888) 220-6118 or complete the form below.