Secondary & Tertiary Effluent Disinfection

TrojanUV systems are installed in secondary and tertiary wastewater treatment plants around the world

About Secondary & Tertiary Wastewater Treatment

  • The vast majority of wastewater treatment plants around the world provide secondary treatment through conventional activated sludge processes
  • Secondary processes are effective upstream of UV disinfection since they remove particles and improve water quality
  • Some wastewater treatment plants have tertiary treatment processes that use an additional filtration process to further improve water quality

Wastewater treatment plants utilizing secondary and tertiary treatment processes typically require a disinfection step prior to discharging effluent into receiving waters.

The disinfection limits for wastewater systems are typically measured in the number of colony forming units (CFU) per 100 mL of effluent. The CFU measured is typically Fecal Coliform, but some regulatory bodies require measurement of Escherichia coli (E .coli), Total Coliform or Enterococci.

Disinfection is Critical

The main objective of disinfection is to reduce the number of waterborne pathogens to safe and permissible levels, thereby lowering the risk of exposing the public to infectious diseases.

UV is an ideal disinfection solution for wastewater treatment plants using secondary and tertiary treatment processes. Unlike other chemical disinfectants, UV does not produce any carcinogenic disinfection by-products that could adversely affect the water quality. It is also effective against chlorine-resistant protozoa Cryptosporidium and Giardia.

  
Wastewater in aeration basins

Upstream Processes

The type and size of UV disinfection system is influenced by upstream secondary and tertiary treatment processes. Generally, higher quality effluent requires less UV equipment due to its higher UV transmittance (UVT) and lower total suspended solids (TSS).

UVT is the ratio of light entering the water to that exiting the water. Simply put, water with high UVT (e.g., 85%) is relatively clear, whereas water with lower UVT is more turbid.

Upstream ProcessTypical UVT
Primary Treatment10% - 45%
Lagoon30% - 55%
Fixed Film (Trickling Filter, Rotating Biological Contractor)45% - 65%
Activated Sludge/Suspended Growth55% - 75%
Media Filtration60% - 80%
Membrane Filtration65% - 85%

Suspended solids are bacteria-laden particles of varying number and size. TSS levels are directly related to the concentration of particle-associated bacteria and are more difficult to disinfect than free-floating bacteria. Particles reduce the UV intensity by absorbing and scattering UV light.

The UV dose required for system sizing will depend on the disinfection standard to be achieved and regulatory requirements.

UV in Action

Kansas Wastewater Treatment Plant Makes a Long-overdue UV System Replacement 

The Water Pollution Control Department of the Unified Government of Wyandotte County and Kansas City, KS provides wastewater and stormwater services for more than 150,000 residents. Their top priority is protecting public health and the environment, and they work tirelessly to ensure that both wastewater and stormwater are treated and returned safely to the Missouri River.

So, when they were informed that it would take approximately $150,000 to keep the aging UV system operational, Unified Government and its Water Pollution Control Department decided to look into other UV equipment suppliers and investigate another UV disinfection solution. They were looking for a UV solution that would provide them with a better user experience and be easier to maintain.

Learn More

Case study about a wastewater treatment plant in Kansas that replaced an aging UV disinfection system with the TrojanUV3000Plus  

UV Kind of Town, Chicago is

The Metropolitan Water Reclamation District of Greater Chicago (MWRD) – of which the Terrence J. O’Brien Water Reclamation Plant (WRP) is part of – has made a number of upgrades to its treatment process in recent years. The addition of UV disinfection has been a critical part of these upgrades; it played a key role in improving water quality throughout the Chicago Area Waterway System (CAWS).

Learn More

Case study about the TrojanUVSigna installation at the Terrence J. O’Brien Water Reclamation Plant in Chicago  

Systems for Secondary & Tertiary Effluent Disinfection

TrojanUVSigna Bank

TrojanUVSigna

The TrojanUVSigna® incorporates innovations, including TrojanUV Solo Lamp® Technology, to reduce the total cost of ownership and drastically simplify operation and maintenance. It is the ideal solution for treatment plants in need of revolutionary UV technology.

Learn More

TrojanUVFlex 100 Series Chamber

TrojanUVFlex

The TrojanUVFlex® is ideal for non-potable reuse and other wastewater applications where the treatment of filtered tertiary effluent is required. It is designed with features to make installation and operation simpler, faster and more cost-effective than ever before. Built on the TrojanUV Solo Lamp Technology platform, TrojanUVFlex allows for energy-efficient high-intensity delivery of UV light in an extremely compact footprint.

Learn More

TrojanUV3000PTP Module

TrojanUV3000PTP

The TrojanUV3000®PTP is pre-engineered for quick, inexpensive installation and is ideal for small wastewater disinfection applications. The system can be equipped with prefabricated stainless steel channels and transition boxes for integration with existing flanged piping.

Learn More

TrojanUV3000B Module

TrojanUV3000B

The TrojanUV3000®B is a simple, yet robust, wastewater disinfection system for small communities and towns.

Learn More

TrojanUV3000Plus Module

TrojanUV3000Plus

The TrojanUV3000Plus® is one of the reasons why UV is now a favored technology in wastewater disinfection. Often touted as a flagship UV system, it has demonstrated effective and reliable performance around the world. In fact, over 2,000 municipalities rely on it to disinfect over 30 billion gallons of wastewater every day.

Learn More

TrojanUVFit Chamber

TrojanUVFit

Depending on site and design conditions, wastewater treatment plants producing filtered effluent sometimes prefer a disinfection solution using in-pipe (also called closed-vessel) UV chambers. The TrojanUVFit® offers an effective, compact, and energy-efficient solution for non-potable reuse.

Learn More

We're Here to Help

Have questions? Call us at 1 (888) 220-6118 or complete the form below.