This presentation examined how site-specific water chemistry affects UV advanced oxidation performance, energy use and cost for 1,4-dioxane treatment. Findings from six full-scale installations highlight the influence of treatment targets, UV transmittance, alkalinity, pH and lamp selection, reinforcing the value of bench-scale testing for effective system design.
The USEPA’s Unregulated Contaminant Monitoring Rule 3 (UCMR3) identified elevated concentrations of the emerging micropollutant 1,4‑dioxane in groundwater supplies across the United States, including North Carolina, prompting concern among drinking water utilities, regulators, and consulting engineers.
Unlike many other contaminants of emerging concern, 1,4‑dioxane presents a unique treatment challenge due to its high solubility, low molecular weight, and resistance to adsorption. These characteristics allow it to pass through advanced filtration technologies such as reverse osmosis (RO) and granular activated carbon (GAC), otherwise considered best available treatment for other organic micropollutants, including per‑ and polyfluoroalkyl substances (PFAS). Alternatively, ultraviolet advanced oxidation processes (UV AOP) have become the most reliable and widely applied treatment technology for 1,4‑dioxane. UV AOP relies on the in-situ generation of highly reactive hydroxyl radicals through the interaction of UV light with an oxidant such as hydrogen peroxide. These radicals degrade contaminants by breaking molecular bonds rather than separating them from the water.
This presentation evaluated six full‑scale UV AOP installations and examined how site‑specific water chemistry influences system performance and electrical power demand. Across the sites, the power required to meet 1,4‑dioxane treatment objectives ranged from 0.16 kWh/kgal to 7.54 kWh/kgal, representing nearly a 50‑fold difference. Key drivers of this variability included treatment targets, ultraviolet transmittance (UVT), and radical scavenging parameters such as alkalinity and pH. At one installation, alkalinity levels were nearly an order of magnitude higher than those at another site with comparable treatment goals, UVT, and oxidant dosing. This higher‑alkalinity system required nearly twice the electrical power, as carbonate species competed with 1,4‑dioxane for hydroxyl radicals, reducing UV AOP efficiency and increasing operational costs.
Download the Whitepaper
Have questions?
Call us at 1 (888) 220-6118 or complete the form below.
In another case, a site exhibited nitrate concentrations up to 28.8 mg/L as NO₃⁻, compared to less than 5 mg/L at the other installations. Despite this elevated nitrate, UV AOP performance and power demand were largely unaffected. This is attributed to the use of monochromatic low‑pressure UV lamps emitting at 254 nm, a wavelength minimally impacted by nitrate absorption. In contrast, polychromatic UV sources emitting below 240 nm would likely experience performance losses due to nitrate absorption and nitrite formation, which inhibit radical‑driven oxidation. These findings highlight the importance of lamp selection and understanding how specific water quality parameters influence UV effectiveness and oxidant chemistry.
Learning Outcomes
The objective of this presentation was to equip engineers, utility managers, regulators, and water system owners with a practical scientific foundation for addressing 1,4‑dioxane and other hard‑to‑treat micropollutants through radical‑driven degradation using UV AOP. Emphasis is placed on UV fundamentals, oxidant selection, and the critical role of bench‑scale testing in characterizing local water chemistry. The presentation underscored how variability can exist even within relatively small geographic regions and how this directly impacts system design, cost, and long‑term performance. Ultimately, this work provided actionable guidance for water professionals seeking reliable, defensible, and cost‑effective treatment solutions in an era of increasing regulatory scrutiny and emerging contaminant challenges.